Loading...
Serving Palm Beach Gardens, FL and surrounding areas. (728) 529-5144
Bare, dull concrete doesn't do justice to your space. A properly installed metallic epoxy floor gives your garage, lanai, or living area a seamless, high-gloss finish built for South Florida's heat and humidity.
Metallic epoxy flooring in Palm Beach Gardens is a thick, poured coating applied directly over your existing concrete slab. Tiny metallic pigment particles swirl and shift as the coating is spread, creating a one-of-a-kind, three-dimensional look. Most residential jobs take two to three days from surface preparation through final cure.
If your garage floor looks dingy no matter how much you clean it, or your lanai concrete has seen better days, metallic epoxy is one of the fastest ways to make a space feel intentional and finished. It works for garages, laundry rooms, covered outdoor areas, and interior living spaces throughout Palm Beach Gardens. Homeowners who want even faster cure times often compare it to polyaspartic floor coatings, which offer a similar high-gloss result with a shorter off-limits window.
The most important thing to understand about metallic epoxy in South Florida is that moisture management is everything. Palm Beach County gets roughly 60 inches of rain a year, and concrete slabs here sit directly on the ground. A contractor who tests your slab and uses humidity-rated materials is the difference between a floor that lasts a decade and one that peels within a year.
Bare concrete is porous, and years of oil drips, cleaning products, and foot traffic leave marks that won't scrub away. If your floor looks dingy no matter how hard you clean it, the surface itself needs a fresh start. Metallic epoxy seals those pores and gives you a surface that actually wipes clean.
In South Florida's climate, moisture constantly pushes up through concrete slabs from the damp ground below. Those white, powdery patches - sometimes called efflorescence - are mineral deposits left behind as moisture evaporates. If you see them on your garage floor or patio, it signals an active moisture situation that must be addressed before any coating goes down.
If a previous floor coating is lifting in patches, that is almost always a sign the original prep work was inadequate or the product was not suited to Florida's humidity. Peeling coatings are also a slip hazard. A proper metallic epoxy installation with moisture testing and surface preparation will bond far more durably than a standard paint or hardware-store kit.
Many Palm Beach Gardens homeowners are converting garages into gyms, workshops, or entertainment spaces. If the floor is the last thing in the room that still looks unfinished, metallic epoxy is one of the fastest ways to make the whole space feel complete and polished - without a full renovation.
We install metallic epoxy floors for garages, laundry rooms, basements, covered lanais, pool surrounds, and commercial showrooms throughout Palm Beach Gardens and surrounding communities. Every project starts with a proper slab moisture test and diamond grinding to ensure the coating bonds correctly - not just for day one, but for the decade ahead. For spaces where durability matters more than decorative effects, we also offer urethane cement flooring, which handles heat, moisture, and heavy use with exceptional performance.
For homeowners who want the look of metallic epoxy with a similar finish that offers even broader versatility, our standard epoxy floor coatings service covers solid colors, flake systems, and high-build clear-coat applications. Each installation is planned around the specific space, the homeowner's use case, and the realities of South Florida's slab conditions.
Ideal for homeowners upgrading garages, laundry rooms, or interior living spaces who want a custom, high-gloss look.
Suits showrooms, retail spaces, and commercial lobbies where a distinctive floor finish reinforces a professional image.
Designed for covered outdoor areas with UV-stable topcoats and slip-resistant additives suited to wet South Florida environments.
Best for spaces that need rapid return-to-service times - the polyaspartic topcoat cures faster than traditional clear coats.
Palm Beach Gardens sits in a subtropical climate where humidity regularly climbs above 80 percent from May through October. Concrete slabs here are built slab-on-grade - poured directly on top of the soil, with no basement beneath them. That means moisture wicks upward through the slab year-round, not just after rain. Any coating applied here must be installed with that reality in mind. Metallic epoxy, installed with proper moisture testing and a vapor-blocking primer, bonds durably even in these conditions - which is why it is a popular choice across communities in Jupiter and Tequesta as well.
The local luxury housing market also raises the bar for finish quality. Palm Beach Gardens is one of the wealthier communities in Palm Beach County, and buyers and guests notice the quality of finishes - especially in garages and high-use spaces. A metallic epoxy floor photographs well, stands out during home showings, and signals that a property has been thoughtfully maintained. Homeowners in HOA communities like PGA National and Ballenisles can also choose finish colors and sheen levels that meet their association's appearance guidelines before a single drop of material goes down. The American Society of Concrete Contractors provides standards and best practices that guide how licensed Florida contractors handle these moisture-critical installations.
Describe your space and we'll schedule a visit. You'll hear back within 1 business day. No commitment required to get a written, itemized estimate.
We measure the area, inspect the slab, and test for moisture - a critical step in South Florida. If moisture levels are elevated, we discuss solutions before quoting.
The crew grinds the concrete, then applies the metallic epoxy base coat, the pigment layer, and a protective clear topcoat. The floor looks dramatically different by the time the crew packs up.
Light foot traffic is safe after 24 hours. Keep cars off a garage floor for at least 72 hours. We walk you through care instructions and leave you with a warranty before we leave.
Free estimate, no obligation. We test your slab and give you a written quote before any work begins.
South Florida slabs are in constant contact with damp soil, so we test every slab for moisture before starting. If levels are elevated, we apply a vapor-blocking primer - the step most failed coatings skipped. This is non-negotiable on every project we take.
Florida law requires any contractor working in your home for compensation to hold a state license through the Department of Business and Professional Regulation. You can verify our license in seconds at the DBPR's online lookup. Hiring unlicensed operators puts you at risk if anything goes wrong.
We can show you completed metallic epoxy projects in Palm Beach Gardens and nearby communities - not just a national gallery. Local experience matters here because South Florida slabs and humidity conditions are different from most of the country, and our work reflects that.
We back every metallic epoxy installation with a written warranty. A contractor confident in their prep work and materials is happy to put it in writing - and we do. Ask us what the warranty covers and what voids it before we start.
Every one of these points matters because metallic epoxy in South Florida either lasts or it peels - and the difference lives entirely in preparation and product selection. We do the work correctly the first time so you are not calling someone back six months later.
A thick, poured coating that manages moisture movement and handles heavy daily use in garages, laundry rooms, and commercial spaces.
Learn MoreSolid color, flake, and high-build epoxy systems for homeowners who want a durable, low-maintenance sealed floor at a range of price points.
Learn MoreFall and winter booking windows fill fast - reach out now to hold your installation spot before the season fills up.